SOM-02-03 Chapter 02 · Principal Stresses and Strains

Mohr's Circle of Plane Stress

In this chapter (5 topics)
On this page

1. Metadata & Syllabus Mapping

Attribute Specification
Topic ID SOM-02-03
Module / Subject Subject 02: Strength of Materials (notes/strength_of_materials/)
Chapter Chapter 02: Principal Stresses and Strains (02_principal_stresses_and_strains)
Target Examinations GATE CE, UPSC ESE, SSC JE, RRB JE, State AE, State JE
Prerequisites SOM-01-01 (Stress and Strain), SOM-02-01 (Transformation on Oblique Planes), SOM-02-02 (Principal Stresses & Max Shear)
Primary Code References IS 456:2000 (Concrete Shear & Principal Stresses), IS 800:2007 (Steel Yield Criteria), ASTM D2850 (Triaxial Soil Testing)
Verification Gate Level 1 through Level 7 Quality Standards

Official Examination Syllabus Mapping

Website note: this mapping is from the author’s notes. It has not been checked against the official notification for each examination; confirm the current syllabus with the examining body.

- GATE Civil Engineering: Solid Mechanics — Transformation of plane stress; Mohr's circle of stress; principal stresses and maximum shear stress; graphical interpretation; absolute maximum shear stress; stress invariants.
- UPSC ESE (Engineering Services): Paper-I Solid Mechanics — Graphical representation of state of stress; Mohr's circle construction; pole of Mohr's circle; application to canonical stress states (pure shear, hydrostatic, uniaxial).
- SSC JE / RRB JE / State AE: Mohr's stress circle radius, center, and coordinate properties; relationship between physical plane angle θ and circle angle 2θ; radius equals maximum in-plane shear stress.

2. Introduction & Physical Mechanics

In 1882, German civil engineer Christian Otto Mohr devised an elegant, exact graphical representation of stress transformation in continuous deformable bodies.

While the analytical equations for plane stress transformation (derived in SOM-02-01) involve coupled trigonometric functions:

σθ=(σx+σy2)+(σx−σy2)cos⁡2θ+τxysin⁡2θ\sigma_\theta = \left(\frac{\sigma_x + \sigma_y}{2}\right) + \left(\frac{\sigma_x - \sigma_y}{2}\right)\cos 2\theta + \tau_{xy}\sin 2\theta τθ=−(σx−σy2)sin⁡2θ+τxycos⁡2θ\tau_\theta = -\left(\frac{\sigma_x - \sigma_y}{2}\right)\sin 2\theta + \tau_{xy}\cos 2\theta

Mohr recognized that by eliminating the parameter 2θ2\theta, the transformation equations describe the equation of a circle in the Cartesian plane (σ,τ)(\sigma, \tau).

Core Insights:

  1. Duality Between Physical Element and Mohr's Circle:
    • Every physical plane through a stressed point corresponds to a single point (σ,τ)(\sigma, \tau) on Mohr's circle.
    • Two mutually perpendicular planes in physical space (separated by 90∘90^\circ) correspond to the two diametrically opposite endpoints of a diameter on Mohr's circle (separated by 180∘180^\circ).
    • Any physical rotation of angle θ\theta corresponds to an angular rotation of 2θ2\theta on Mohr's circle in the same directional sense.
  2. Stress Invariants Visualized Geometrically:
    • The center of the circle lies permanently on the normal stress axis (σ\sigma-axis) at coordinates (σavg,0)(\sigma_{\text{avg}}, 0). Its position is completely independent of the element's coordinate orientation.
    • The radius RR is constant regardless of how the coordinate axes are rotated, proving that the maximum in-plane shear stress τmax⁡=R\tau_{\max} = R is an inherent physical property of the stress state.
  3. The Pole (Origin of Planes):
    • A unique point on Mohr's circle that allows direct, instantaneous determination of the stresses on any plane simply by drawing a line parallel to that physical plane.

3. Mathematical Formulations & Derivations

3.1 Derivation of the Equation of Mohr's Circle

Recall the plane stress transformation relations for an oblique plane inclined at angle θ\theta counterclockwise from the vertical plane:

σθ−(σx+σy2)=(σx−σy2)cos⁡2θ+τxysin⁡2θ(Eq. 3.1)\sigma_\theta - \left(\frac{\sigma_x + \sigma_y}{2}\right) = \left(\frac{\sigma_x - \sigma_y}{2}\right)\cos 2\theta + \tau_{xy}\sin 2\theta \tag{Eq. 3.1} τθ=−(σx−σy2)sin⁡2θ+τxycos⁡2θ(Eq. 3.2)\tau_\theta = -\left(\frac{\sigma_x - \sigma_y}{2}\right)\sin 2\theta + \tau_{xy}\cos 2\theta \tag{Eq. 3.2}

Squaring both sides of Eq. (3.1):

[σθ−(σx+σy2)]2=(σx−σy2)2cos⁡22θ+τxy2sin⁡22θ+2(σx−σy2)τxycos⁡2θsin⁡2θ(Eq. 3.3)\left[\sigma_\theta - \left(\frac{\sigma_x + \sigma_y}{2}\right)\right]^2 = \left(\frac{\sigma_x - \sigma_y}{2}\right)^2 \cos^2 2\theta + \tau_{xy}^2 \sin^2 2\theta + 2\left(\frac{\sigma_x - \sigma_y}{2}\right)\tau_{xy}\cos 2\theta \sin 2\theta \tag{Eq. 3.3}

Squaring both sides of Eq. (3.2):

τθ2=(σx−σy2)2sin⁡22θ+τxy2cos⁡22θ−2(σx−σy2)τxysin⁡2θcos⁡2θ(Eq. 3.4)\tau_\theta^2 = \left(\frac{\sigma_x - \sigma_y}{2}\right)^2 \sin^2 2\theta + \tau_{xy}^2 \cos^2 2\theta - 2\left(\frac{\sigma_x - \sigma_y}{2}\right)\tau_{xy}\sin 2\theta \cos 2\theta \tag{Eq. 3.4}

Adding Eq. (3.3) and Eq. (3.4) directly eliminates the cross-product terms:

[σθ−(σx+σy2)]2+τθ2=(σx−σy2)2(cos⁡22θ+sin⁡22θ)+τxy2(sin⁡22θ+cos⁡22θ)\left[\sigma_\theta - \left(\frac{\sigma_x + \sigma_y}{2}\right)\right]^2 + \tau_\theta^2 = \left(\frac{\sigma_x - \sigma_y}{2}\right)^2 (\cos^2 2\theta + \sin^2 2\theta) + \tau_{xy}^2 (\sin^2 2\theta + \cos^2 2\theta)

Using the fundamental identity cos⁡22θ+sin⁡22θ=1\cos^2 2\theta + \sin^2 2\theta = 1:

(σθ−σavg)2+τθ2=R2(Eq. 3.5)\mathbf{\left(\sigma_\theta - \sigma_{\text{avg}}\right)^2 + \tau_\theta^2 = R^2} \tag{Eq. 3.5}

where:

σavg=σx+σy2(Eq. 3.6)\mathbf{\sigma_{\text{avg}} = \frac{\sigma_x + \sigma_y}{2}} \tag{Eq. 3.6} R=(σx−σy2)2+τxy2(Eq. 3.7)\mathbf{R = \sqrt{\left(\frac{\sigma_x - \sigma_y}{2}\right)^2 + \tau_{xy}^2}} \tag{Eq. 3.7}

This is the standard algebraic equation of a circle:

(x−xc)2+(y−yc)2=R2(x - x_c)^2 + (y - y_c)^2 = R^2

where:

  • The horizontal coordinate is normal stress: x=σx = \sigma.
  • The vertical coordinate is shear stress: y=τy = \tau.
  • Center Coordinates: C=(xc,yc)=(σavg,0)=(σx+σy2,0)C = (x_c, y_c) = (\sigma_{\text{avg}}, 0) = \left(\frac{\sigma_x + \sigma_y}{2}, 0\right).
  • Radius of Circle: R=(σx−σy2)2+τxy2R = \sqrt{\left(\frac{\sigma_x - \sigma_y}{2}\right)^2 + \tau_{xy}^2}.

3.2 Sign Conventions for Mohr's Circle

To ensure complete correspondence between mathematical equations and graphical constructions, the standard engineering sign convention is:

  1. Normal Stress (σ\sigma):
    • Tensile stress (++): Plotted to the right of the vertical τ\tau-axis.
    • Compressive stress (−-): Plotted to the left of the vertical τ\tau-axis.
  2. Shear Stress (τ\tau):
    • Clockwise Shear (++): Plotted upward (above the σ\sigma-axis). A shear stress that tends to rotate the differential element clockwise is assigned a positive vertical coordinate.
    • Counterclockwise Shear (−-): Plotted downward (below the σ\sigma-axis).
  3. Reference Planes:
    • Vertical Plane (Face xx): Coordinates X=(σx,τxy,face x)X = (\sigma_x, \tau_{xy, \text{face } x}).
    • Horizontal Plane (Face yy): Coordinates Y=(σy,τxy,face y)Y = (\sigma_y, \tau_{xy, \text{face } y}).
    • By complementary shear: if the shear on Face xx is clockwise, the shear on Face yy is counterclockwise. Thus, XX and YY always lie on opposite sides of the σ\sigma-axis!
Point X (Vertical face of element): (σ_x, τ_xy)   [Shear plotted according to rotational tendency]
Point Y (Horizontal face of element): (σ_y, -τ_xy)

The line connecting XX and YY passes directly through the center C(σavg,0)C(\sigma_{\text{avg}}, 0), forming the reference diameter of Mohr's circle.


3.3 Extraction of Critical Stress Values from Mohr's Circle

                             τ (Shear: CW +)
                                   |
                                   |         Top Point: τ_max = R
                                   |             (σ_avg, R)
                                   |                 ▲
                                   |              *  *  *
                                   |          *      |      *
                          X(σ_x,τ) |       *         |         *
                               \   |      *          |          *
                                \  |     *           |           *
    Minor Principal P2           \ |    *            |            *    Major Principal P1
    (σ_2, 0)                      \|   *             |             *   (σ_1, 0)
    ---|---------------------------+--*--------------+--------------*--|------------> σ
      O \                         C| (σ_avg,0)                       \
         \                         |                                  \
          \                        |                                   \
           \                       |                                    \
            \                      |                                     \
             *                     |                                      *
              *                    |                                     *
               *                   |                  *                 *
                 *                 |              *      *           *
                   *  *  *         |          *              *  *  *
                          \        |         ▼
                        Y(σ_y,-τ)  |    Bottom Point: -τ_max = -R
                                   |       (σ_avg, -R)
  1. Major Principal Stress (σ1\sigma_1): The rightmost intersection of the circle with the σ\sigma-axis (τ=0\tau = 0):

    σ1=OC+R=σavg+R=σx+σy2+(σx−σy2)2+τxy2(Eq. 3.8)\mathbf{\sigma_1 = OC + R = \sigma_{\text{avg}} + R = \frac{\sigma_x + \sigma_y}{2} + \sqrt{\left(\frac{\sigma_x - \sigma_y}{2}\right)^2 + \tau_{xy}^2}} \tag{Eq. 3.8}
  2. Minor Principal Stress (σ2\sigma_2): The leftmost intersection of the circle with the σ\sigma-axis (τ=0\tau = 0):

    σ2=OC−R=σavg−R=σx+σy2−(σx−σy2)2+τxy2(Eq. 3.9)\mathbf{\sigma_2 = OC - R = \sigma_{\text{avg}} - R = \frac{\sigma_x + \sigma_y}{2} - \sqrt{\left(\frac{\sigma_x - \sigma_y}{2}\right)^2 + \tau_{xy}^2}} \tag{Eq. 3.9}
  3. Maximum In-Plane Shear Stress (τmax⁡\tau_{\max}): The highest and lowest peaks of the circle (ordinates at σ=σavg\sigma = \sigma_{\text{avg}}):

    τmax⁡,in-plane=R=σ1−σ22=(σx−σy2)2+τxy2(Eq. 3.10)\mathbf{\tau_{\max, \text{in-plane}} = R = \frac{\sigma_1 - \sigma_2}{2} = \sqrt{\left(\frac{\sigma_x - \sigma_y}{2}\right)^2 + \tau_{xy}^2}} \tag{Eq. 3.10}
  4. Normal Stress on Maximum Shear Planes (σs\sigma_s): The abscissa of the highest/lowest points on the circle:

    σs=σavg=σx+σy2=σ1+σ22(Eq. 3.11)\mathbf{\sigma_s = \sigma_{\text{avg}} = \frac{\sigma_x + \sigma_y}{2} = \frac{\sigma_1 + \sigma_2}{2}} \tag{Eq. 3.11}
  5. Principal Plane Orientations: The angle between the reference diameter CXCX and the principal axis CP1CP_1 is 2θp12\theta_{p1}:

    cos⁡2θp1=σx−σavgR=σx−σy2R,sin⁡2θp1=τxyR\cos 2\theta_{p1} = \frac{\sigma_x - \sigma_{\text{avg}}}{R} = \frac{\frac{\sigma_x - \sigma_y}{2}}{R}, \qquad \sin 2\theta_{p1} = \frac{\tau_{xy}}{R} tan⁡2θp1=τxyσx−σy2=2τxyσx−σy(Eq. 3.12)\mathbf{\tan 2\theta_{p1} = \frac{\tau_{xy}}{\frac{\sigma_x - \sigma_y}{2}} = \frac{2\tau_{xy}}{\sigma_x - \sigma_y}} \tag{Eq. 3.12}

3.4 Canonical Stress States on Mohr's Circle

Mohr's circle provides rapid visual insight into standard canonical stress fields:

1. Pure Uniaxial Tension (σx=σ,σy=0,τxy=0\sigma_x = \sigma, \sigma_y = 0, \tau_{xy} = 0)

  • Center: C=(σ/2,0)C = (\sigma/2, 0)
  • Radius: R=σ/2R = \sigma/2
  • Principal Stresses: σ1=σ,σ2=0\sigma_1 = \sigma, \sigma_2 = 0
  • Maximum In-Plane Shear: τmax⁡=σ/2\tau_{\max} = \sigma/2
  • Geometrical Property: The circle touches the vertical τ\tau-axis at the origin O(0,0)O(0,0) and lies entirely in the positive σ\sigma half-plane.

2. Pure Uniaxial Compression (σx=−σ,σy=0,τxy=0\sigma_x = -\sigma, \sigma_y = 0, \tau_{xy} = 0)

  • Center: C=(−σ/2,0)C = (-\sigma/2, 0)
  • Radius: R=σ/2R = \sigma/2
  • Principal Stresses: σ1=0,σ2=−σ\sigma_1 = 0, \sigma_2 = -\sigma
  • Maximum In-Plane Shear: τmax⁡=σ/2\tau_{\max} = \sigma/2
  • Geometrical Property: The circle touches the vertical τ\tau-axis at the origin O(0,0)O(0,0) and lies entirely in the negative σ\sigma half-plane.

3. Pure Shear (σx=0,σy=0,τxy=τ\sigma_x = 0, \sigma_y = 0, \tau_{xy} = \tau)

  • Center: C=(0,0)C = (0, 0) (the origin itself!)
  • Radius: R=τR = \tau
  • Principal Stresses: σ1=+τ,σ2=−τ\sigma_1 = +\tau, \sigma_2 = -\tau
  • Geometrical Property: The circle is centered symmetrically at the origin. The principal stresses are equal in magnitude and opposite in sign (σ1=−σ2\sigma_1 = -\sigma_2).

4. Hydrostatic / Equal Biaxial Stress (σx=σy=σ,τxy=0\sigma_x = \sigma_y = \sigma, \tau_{xy} = 0)

  • Center: C=(σ,0)C = (\sigma, 0)
  • Radius: R=(σ−σ2)2+02=0R = \sqrt{\left(\frac{\sigma - \sigma}{2}\right)^2 + 0^2} = 0
  • Geometrical Property: The circle degenerates into a single point on the normal stress axis!
  • Consequence: Every plane through the point has the identical normal stress σ\sigma and zero shear stress (τ=0\tau = 0). No in-plane shear stress can exist on any plane.

5. Equal and Opposite Biaxial Stress (σx=+σ,σy=−σ,τxy=0\sigma_x = +\sigma, \sigma_y = -\sigma, \tau_{xy} = 0)

  • Center: C=(0,0)C = (0, 0)
  • Radius: R=σR = \sigma
  • Principal Stresses: σ1=+σ,σ2=−σ\sigma_1 = +\sigma, \sigma_2 = -\sigma
  • Geometrical Property: Identical in geometry to pure shear rotated by 45∘45^\circ. Demonstrates that equal and opposite biaxial tension/compression produces pure shear of magnitude τ=σ\tau = \sigma on planes at 45∘45^\circ.

3.5 The Method of the Pole (Origin of Planes)

The Pole (also called the Origin of Planes) is a unique reference point PP on Mohr's circle with a powerful geometric property:

The Pole Theorem:
A straight line drawn from the Pole PP parallel to any physical plane will intersect Mohr's circle at the point (σ,τ)(\sigma, \tau) representing the state of stress acting on that physical plane.
Conversely, a straight line connecting the Pole PP to any stress point (σθ,τθ)(\sigma_\theta, \tau_\theta) on the circle gives the true physical inclination of that plane!

Construction Procedure to Find the Pole:

  1. Locate the stress point X(σx,τxy)X(\sigma_x, \tau_{xy}) representing the vertical plane of the element.
  2. From point XX, draw a line parallel to the plane on which those stresses act (i.e., draw a vertical line).
  3. The intersection of this line with Mohr's circle is the Pole (PP).
  4. (Alternatively, from point Y(σy,−τxy)Y(\sigma_y, -\tau_{xy}) representing the horizontal plane, draw a horizontal line. It will intersect the circle at the exact same point PP).

Once the Pole PP is found, the physical direction of the principal planes is immediately obtained by drawing straight lines from PP to P1(σ1,0)P_1(\sigma_1, 0) and P2(σ2,0)P_2(\sigma_2, 0).


3.6 3D Triaxial Mohr's Circles & The Stress Envelope

In general three-dimensional stress analysis, every stress state is characterized by three principal stresses ordered algebraically:

σ1≥σ2≥σ3(Eq. 3.13)\sigma_1 \ge \sigma_2 \ge \sigma_3 \tag{Eq. 3.13}

The Mohr representation in 3D consists of three distinct circles plotted on the (σ,τ)(\sigma, \tau) plane:

  1. Circle 1-2: Spanning from σ2\sigma_2 to σ1\sigma_1, with center C12=(σ1+σ22,0)C_{12} = \left(\frac{\sigma_1 + \sigma_2}{2}, 0\right) and radius R12=σ1−σ22R_{12} = \frac{\sigma_1 - \sigma_2}{2}.
  2. Circle 2-3: Spanning from σ3\sigma_3 to σ2\sigma_2, with center C23=(σ2+σ32,0)C_{23} = \left(\frac{\sigma_2 + \sigma_3}{2}, 0\right) and radius R23=σ2−σ32R_{23} = \frac{\sigma_2 - \sigma_3}{2}.
  3. Circle 1-3 (Outer Circle): Spanning from σ3\sigma_3 to σ1\sigma_1, with center C13=(σ1+σ32,0)C_{13} = \left(\frac{\sigma_1 + \sigma_3}{2}, 0\right) and radius R13=σ1−σ32R_{13} = \frac{\sigma_1 - \sigma_3}{2}.
                 τ
                 |                Outer Circle (1-3)
                 |                     *  *  *
                 |                 *      |      *
                 |              *      *  *  *      *
                 |             *   *     / \     *   *
                 |            *  *      /   \      *  *
                 |           * *       /     \       * *
                 |          **         Circle 1-2     **
                 |          *           *  *  *        *
                 |          *   *   *             *    *
                 +----------+-------+-------------+----+------------> σ
                O         σ_3     σ_2           σ_1
                           Circle 2-3

The Admissible Stress Domain:

For any arbitrarily oriented oblique plane in three-dimensional space, the normal stress σ\sigma and shear stress τ\tau cannot fall outside the outer circle, nor can they fall inside the two inner circles.
All possible stress combinations (σ,τ)(\sigma, \tau) in the body lie within the shaded annular region bounded between the three circles.

Absolute Maximum Shear Stress:

The peak of the outermost circle gives the true 3D maximum shear stress:

τabs, max=R13=σ1−σ32(Eq. 3.14)\mathbf{\tau_{\text{abs, max}} = R_{13} = \frac{\sigma_1 - \sigma_3}{2}} \tag{Eq. 3.14}

For a state of plane stress, σ3=0\sigma_3 = 0. Hence:

  • If σ1>0\sigma_1 > 0 and σ2<0\sigma_2 < 0: σ1≥0≥σ2  ⟹  τabs, max=σ1−σ22=τmax⁡,in-plane\sigma_1 \ge 0 \ge \sigma_2 \implies \tau_{\text{abs, max}} = \frac{\sigma_1 - \sigma_2}{2} = \tau_{\max, \text{in-plane}}.
  • If σ1>σ2>0\sigma_1 > \sigma_2 > 0: σ1≥σ2≥0  ⟹  τabs, max=σ1−02=σ12>τmax⁡,in-plane\sigma_1 \ge \sigma_2 \ge 0 \implies \tau_{\text{abs, max}} = \frac{\sigma_1 - 0}{2} = \frac{\sigma_1}{2} > \tau_{\max, \text{in-plane}}.

4. Engineering Assumptions & Limitations

  1. Infinitesimal Element Assumption: The stress tensor components (σx,σy,τxy)(\sigma_x, \sigma_y, \tau_{xy}) represent point values across an infinitesimal continuum element where stress gradients are negligible.
  2. Plane Stress Formulation: Normal and shear stresses in the zz-direction are zero (σz=τxz=τyz=0\sigma_z = \tau_{xz} = \tau_{yz} = 0). For thick structural walls or deep geotechnical soil masses, 3D Mohr's circles must be used.
  3. Linear Elastic Constitutive Response: While Mohr's circle is fundamentally a kinematic/static stress transformation tool that holds regardless of material linearity, its direct link to strains and deflections assumes Hookean behavior.
  4. Sign Convention Rigor: The clockwise-positive shear convention on Face xx is required for the 2θ2\theta angle rotation on the circle to match the physical θ\theta rotation direction.

5. Technical Diagrams

Diagram 1: Geometric Construction of Mohr's Circle of Stress

The vector diagram below details the mapping from reference coordinates X(σx,τxy)X(\sigma_x, \tau_{xy}) and Y(σy,−τxy)Y(\sigma_y, -\tau_{xy}) to the center C(σavg,0)C(\sigma_{\text{avg}}, 0), the major and minor principal points P1,P2P_1, P_2, and the maximum shear stress point.

Mohr's Circle Geometric Construction

Diagram 2: Canonical Stress States and 3D Mohr's Circles

The diagram below illustrates the four fundamental canonical stress states (Uniaxial Tension, Pure Shear, Hydrostatic Point Circle) and the 3D Triaxial Mohr's Circle envelope.

Canonical Stress States and 3D Mohr's Circle

6. Solved Numerical Examples

Example 3.1: General 2D State of Stress & Oblique Plane Stresses

At a critical point on the web of a plate girder, the stress components are:

  • σx=+120 MPa\sigma_x = +120\text{ MPa} (Tension)
  • σy=−20 MPa\sigma_y = -20\text{ MPa} (Compression)
  • τxy=+24 MPa\tau_{xy} = +24\text{ MPa} (Clockwise on the vertical face)

Using Mohr's circle:

  1. Determine the center CC and radius RR of the circle.
  2. Calculate the major and minor principal stresses (σ1,σ2\sigma_1, \sigma_2).
  3. Find the orientation of the principal planes (θp1,θp2\theta_{p1}, \theta_{p2}).
  4. Determine the normal and shear stresses acting on an oblique plane inclined at θ=30∘\theta = 30^\circ counterclockwise to the vertical plane.
Given:
σx = +120 MPa
σy = -20 MPa
τxy = +24 MPa

Solution:

Step 1: Compute Center Coordinates and Radius

  • Abscissa of center:

    σavg=σx+σy2=120+(−20)2=1002=+50 MPa\sigma_{\text{avg}} = \frac{\sigma_x + \sigma_y}{2} = \frac{120 + (-20)}{2} = \frac{100}{2} = \mathbf{+50\text{ MPa}} C=(50,0)C = (50, 0)
  • Half-difference of normal stresses:

    σx−σy2=120−(−20)2=1402=+70 MPa\frac{\sigma_x - \sigma_y}{2} = \frac{120 - (-20)}{2} = \frac{140}{2} = +70\text{ MPa}
  • Radius RR:

    R=(σx−σy2)2+τxy2=702+242=4900+576=5476=74.00 MPaR = \sqrt{\left(\frac{\sigma_x - \sigma_y}{2}\right)^2 + \tau_{xy}^2} = \sqrt{70^2 + 24^2} = \sqrt{4900 + 576} = \sqrt{5476} = \mathbf{74.00\text{ MPa}}

Step 2: Calculate Principal Stresses

  • Major Principal Stress (σ1\sigma_1): σ1=σavg+R=50+74=+124 MPa (Tension)\sigma_1 = \sigma_{\text{avg}} + R = 50 + 74 = \mathbf{+124\text{ MPa}}\text{ (Tension)}
  • Minor Principal Stress (σ2\sigma_2): σ2=σavg−R=50−74=−24 MPa (Compression)\sigma_2 = \sigma_{\text{avg}} - R = 50 - 74 = \mathbf{-24\text{ MPa}}\text{ (Compression)}
  • Maximum In-Plane Shear Stress: τmax⁡,in-plane=R=74 MPa\tau_{\max, \text{in-plane}} = R = \mathbf{74\text{ MPa}}

Check Invariant 1:

σ1+σ2=124+(−24)=100 MPa\sigma_1 + \sigma_2 = 124 + (-24) = 100\text{ MPa} σx+σy=120+(−20)=100 MPa(Confirmed)\sigma_x + \sigma_y = 120 + (-20) = 100\text{ MPa}\quad (\text{Confirmed})

Step 3: Principal Plane Orientations

tan⁡2θp=2τxyσx−σy=2(24)120−(−20)=48140=1235≈0.3429\tan 2\theta_p = \frac{2\tau_{xy}}{\sigma_x - \sigma_y} = \frac{2(24)}{120 - (-20)} = \frac{48}{140} = \frac{12}{35} \approx 0.3429 2θp1=arctan⁡(0.3429)=18.925∘  ⟹  θp1=9.46∘ (Counterclockwise from vertical)2\theta_{p1} = \arctan(0.3429) = 18.925^\circ \implies \mathbf{\theta_{p1} = 9.46^\circ}\text{ (Counterclockwise from vertical)} θp2=θp1+90∘=9.46∘+90∘=99.46∘\theta_{p2} = \theta_{p1} + 90^\circ = 9.46^\circ + 90^\circ = \mathbf{99.46^\circ}

Step 4: Stresses on Oblique Plane at θ=30∘\theta = 30^\circ For point X(120,24)X(120, 24), its coordinates relative to the circle center C(50,0)C(50, 0) are Δσ=120−50=+70 MPa\Delta\sigma = 120 - 50 = +70\text{ MPa} and τxy=+24 MPa\tau_{xy} = +24\text{ MPa} (clockwise shear on the xx-face, plotted below the σ\sigma-axis in the clockwise-downward Mohr's circle convention, at angle 2θp1=18.925∘2\theta_{p1} = 18.925^\circ from the σ1\sigma_1-axis). Rotating counterclockwise by 2θ=60∘2\theta = 60^\circ from radius CXCX (i.e., 60∘−18.925∘=41.075∘60^\circ - 18.925^\circ = 41.075^\circ beyond the principal axis σ1\sigma_1), or directly via the stress transformation equations:

σ30=σavg+(σx−σy2)cos⁡(60∘)+τxysin⁡(60∘)\sigma_{30} = \sigma_{\text{avg}} + \left(\frac{\sigma_x - \sigma_y}{2}\right)\cos(60^\circ) + \tau_{xy}\sin(60^\circ) σ30=50+70cos⁡(60∘)+24sin⁡(60∘)=50+70(0.5)+24(0.8660)=50+35+20.785=105.78 MPa\sigma_{30} = 50 + 70\cos(60^\circ) + 24\sin(60^\circ) = 50 + 70(0.5) + 24(0.8660) = 50 + 35 + 20.785 = \mathbf{105.78\text{ MPa}} τ30=−(σx−σy2)sin⁡(60∘)+τxycos⁡(60∘)\tau_{30} = -\left(\frac{\sigma_x - \sigma_y}{2}\right)\sin(60^\circ) + \tau_{xy}\cos(60^\circ) τ30=−70sin⁡(60∘)+24cos⁡(60∘)=−70(0.8660)+24(0.5)=−60.622+12=−48.62 MPa\tau_{30} = -70\sin(60^\circ) + 24\cos(60^\circ) = -70(0.8660) + 24(0.5) = -60.622 + 12 = \mathbf{-48.62\text{ MPa}}

(Magnitude 48.62 MPa48.62\text{ MPa}, acting counterclockwise on the plane).


Example 3.2: Biaxial Compression with Shear & 3D Shear Analysis

A soil specimen inside a triaxial testing cell is subjected to:

  • σx=−60 kPa\sigma_x = -60\text{ kPa} (Compression)
  • σy=−60 kPa\sigma_y = -60\text{ kPa} (Compression)
  • τxy=+45 kPa\tau_{xy} = +45\text{ kPa}

Determine:

  1. The center and radius of Mohr's circle.
  2. The principal stresses in the xyxy-plane.
  3. The in-plane maximum shear stress.
  4. The true absolute 3D maximum shear stress, assuming σz=0\sigma_z = 0.
Given:
σx = -60 kPa
σy = -60 kPa
τxy = +45 kPa
σz = 0 kPa

Solution:

Step 1: Center and Radius

σavg=σx+σy2=−60+(−60)2=−60 kPa\sigma_{\text{avg}} = \frac{\sigma_x + \sigma_y}{2} = \frac{-60 + (-60)}{2} = \mathbf{-60\text{ kPa}} σx−σy2=−60−(−60)2=0\frac{\sigma_x - \sigma_y}{2} = \frac{-60 - (-60)}{2} = 0 R=02+452=45 kPaR = \sqrt{0^2 + 45^2} = \mathbf{45\text{ kPa}} C=(−60,0)C = (-60, 0)

Step 2: Principal Stresses in the Plane

σ1=σavg+R=−60+45=−15 kPa (Compression)\sigma_1 = \sigma_{\text{avg}} + R = -60 + 45 = \mathbf{-15\text{ kPa}}\text{ (Compression)} σ2=σavg−R=−60−45=−105 kPa (Compression)\sigma_2 = \sigma_{\text{avg}} - R = -60 - 45 = \mathbf{-105\text{ kPa}}\text{ (Compression)}

Step 3: Maximum In-Plane Shear Stress

τmax⁡,in-plane=R=45 kPa\tau_{\max, \text{in-plane}} = R = \mathbf{45\text{ kPa}}

Step 4: Absolute 3D Maximum Shear Stress The three 3D principal stresses are:

σI=0 kPa(since σz=0)\sigma_I = 0\text{ kPa}\quad (\text{since }\sigma_z = 0) σII=−15 kPa\sigma_{II} = -15\text{ kPa} σIII=−105 kPa\sigma_{III} = -105\text{ kPa}

Notice that both in-plane principal stresses are compressive (same sign: σ1<0\sigma_1 < 0 and σ2<0\sigma_2 < 0). Therefore, the algebraically largest principal stress is σmax⁡=0\sigma_{\max} = 0, and the algebraically smallest is σmin⁡=−105 kPa\sigma_{\min} = -105\text{ kPa}.

The true 3D absolute maximum shear stress is:

τabs, max=σmax⁡−σmin⁡2=0−(−105)2=1052=52.5 kPa\mathbf{\tau_{\text{abs, max}} = \frac{\sigma_{\max} - \sigma_{\min}}{2} = \frac{0 - (-105)}{2} = \frac{105}{2} = \mathbf{52.5\text{ kPa}}}

Key Observation: The true maximum shear stress (52.5 kPa52.5\text{ kPa}) is 16.7%16.7\% greater than the in-plane maximum shear stress (45 kPa45\text{ kPa})! Failing to consider the out-of-plane stress σ3=0\sigma_3 = 0 would lead to unconservative design.


Example 3.3: Inverse Mohr's Circle Problem (Stresses on Perpendicular Planes)

On two mutually perpendicular planes AA and BB passing through a point in a masonry wall, the stresses are measured as:

  • Plane AA: σA=+90 MPa\sigma_A = +90\text{ MPa} (Tension), τA=+30 MPa\tau_A = +30\text{ MPa} (Clockwise)
  • Plane BB: σB=+30 MPa\sigma_B = +30\text{ MPa} (Tension), τB=−30 MPa\tau_B = -30\text{ MPa} (Counterclockwise)

Using Mohr's circle geometry:

  1. Prove that line ABAB forms a diameter of the circle.
  2. Find the coordinates of the center CC and the radius RR.
  3. Determine the major and minor principal stresses.
  4. Calculate the stresses on a plane inclined at 45∘45^\circ counterclockwise to Plane AA.
Given:
Point A: (90, +30)
Point B: (30, -30)
Angle between Plane A and Plane B in physical space: 90°

Solution:

Step 1: Diameter Property In physical space, Plane AA and Plane BB are separated by 90∘90^\circ.
On Mohr's circle, the angular separation is 2×90∘=180∘2 \times 90^\circ = 180^\circ.
Therefore, points A(90,30)A(90, 30) and B(30,−30)B(30, -30) are diametrically opposite points, and the line segment ABAB is a true diameter of the circle.

Step 2: Center Coordinates and Radius The center CC is the midpoint of diameter ABAB:

xc=σA+σB2=90+302=+60 MPax_c = \frac{\sigma_A + \sigma_B}{2} = \frac{90 + 30}{2} = \mathbf{+60\text{ MPa}} yc=τA+τB2=30+(−30)2=0 MPay_c = \frac{\tau_A + \tau_B}{2} = \frac{30 + (-30)}{2} = 0\text{ MPa} C=(60,0)C = (60, 0)

The radius RR is half the length of diameter ABAB:

R=(σA−σB2)2+τA2=(90−302)2+302=302+302=302≈42.43 MPaR = \sqrt{\left(\frac{\sigma_A - \sigma_B}{2}\right)^2 + \tau_A^2} = \sqrt{\left(\frac{90 - 30}{2}\right)^2 + 30^2} = \sqrt{30^2 + 30^2} = 30\sqrt{2} \approx \mathbf{42.43\text{ MPa}}

Step 3: Principal Stresses

σ1=xc+R=60+42.43=+102.43 MPa (Tension)\sigma_1 = x_c + R = 60 + 42.43 = \mathbf{+102.43\text{ MPa}}\text{ (Tension)} σ2=xc−R=60−42.43=+17.57 MPa (Tension)\sigma_2 = x_c - R = 60 - 42.43 = \mathbf{+17.57\text{ MPa}}\text{ (Tension)} τmax⁡,in-plane=R=42.43 MPa\tau_{\max, \text{in-plane}} = R = \mathbf{42.43\text{ MPa}}

Step 4: Stresses on Plane at 45∘45^\circ to Plane AA Rotating 45∘45^\circ counterclockwise in physical space corresponds to rotating 2×45∘=90∘2 \times 45^\circ = 90^\circ counterclockwise on Mohr's circle from point A(90,30)A(90, 30).

Relative to center C(60,0)C(60, 0), point AA has coordinates:

Δσ=90−60=+30 MPa,Δτ=+30 MPa\Delta\sigma = 90 - 60 = +30\text{ MPa}, \quad \Delta\tau = +30\text{ MPa}

The angle of vector CACA with the horizontal is:

ψ=arctan⁡(3030)=45∘\psi = \arctan\left(\frac{30}{30}\right) = 45^\circ

Rotating 90∘90^\circ counterclockwise from 45∘45^\circ brings the radius vector to:

ψ′=45∘+90∘=135∘\psi' = 45^\circ + 90^\circ = 135^\circ

The coordinates of this new plane DD are:

σD=xc+Rcos⁡(135∘)=60+302(−12)=60−30=+30 MPa\sigma_D = x_c + R\cos(135^\circ) = 60 + 30\sqrt{2}\left(-\frac{1}{\sqrt{2}}\right) = 60 - 30 = \mathbf{+30\text{ MPa}} τD=Rsin⁡(135∘)=302(12)=+30 MPa\tau_D = R\sin(135^\circ) = 30\sqrt{2}\left(\frac{1}{\sqrt{2}}\right) = \mathbf{+30\text{ MPa}}

7. Practical & Field Engineering Applications

  1. Geotechnical Engineering & Mohr-Coulomb Failure Criterion:
    In soil mechanics (shear strength of clays and sands), Mohr's circles are plotted from consolidated drained (CD) or undrained (CU) triaxial compression tests. The tangent line touching the failure circles across varying cell pressures (σ3\sigma_3) defines the Mohr-Coulomb Failure Envelope:

    τf=c+σtan⁡ϕ\tau_f = c + \sigma \tan \phi

    where cc is soil cohesion and ϕ\phi is the internal angle of friction.

  2. Concrete Shear Design & Diagonal Tension:
    Because concrete has very high compressive strength but brittle tensile strength (fct≈0.7fckf_{ct} \approx 0.7\sqrt{f_{ck}}), Mohr's circle analysis near the supports of reinforced concrete beams demonstrates that flexural shear (τ\tau) and longitudinal bending (σ\sigma) combine to produce principal tensile stresses inclined at approximately 45∘45^\circ. Stirrups (shear reinforcement) are placed vertically or diagonally across these tension cracks.

  3. Strain Rosette Data Reduction:
    In aerospace and bridge testing, electrical resistance strain rosettes measure strains along three angles (e.g., 0∘,45∘,90∘0^\circ, 45^\circ, 90^\circ). Mohr's circle of strain is constructed to graphically determine the principal strains (ϵ1,ϵ2\epsilon_1, \epsilon_2) and principal directions without manual tensor mathematics.

  4. Underground Tunnels & In-Situ Stress Measurement:
    During hydraulic fracturing or overcoring tests in rock mechanics, Mohr's circle determines whether high tectonic horizontal stresses will trigger rockbursting or roof collapse.


8. Comparative Analysis

Analytical Equations vs. Mohr's Circle vs. Method of the Pole

Characteristic Analytical Equations Mohr's Stress Circle Method of the Pole
Primary Advantage High numerical precision, easy to code Instant visual comprehension of all planes Physical plane angles matched 1:1 without 2θ2\theta confusion
Angular Domain Angle is θ\theta Angle is 2θ2\theta Angle is θ\theta directly parallel to physical plane
Principal Stresses Calculated via quadratic square root Extracted from circle intercepts on σ\sigma-axis Intersection of rays from Pole to circle intercepts
Max Shear Stress Peak of trigonometric expression Circle radius RR directly Highest point of circle directly
Risk of Sign Error Moderate to High (signs in arctan⁡2θ\arctan 2\theta) Very Low (visual coordinate placement) Lowest (pure visual ray casting)

Canonical Stress States Summary

Stress State Non-Zero Stresses Center CC Radius RR Major σ1\sigma_1 Minor σ2\sigma_2 Max In-Plane τ\tau
Uniaxial Tension σx=σ\sigma_x = \sigma (σ/2,0)(\sigma/2, 0) σ/2\sigma/2 σ\sigma 00 σ/2\sigma/2
Uniaxial Compression σx=−σ\sigma_x = -\sigma (−σ/2,0)(-\sigma/2, 0) σ/2\sigma/2 00 −σ-\sigma σ/2\sigma/2
Pure Shear τxy=τ\tau_{xy} = \tau (0,0)(0, 0) τ\tau +τ+\tau −τ-\tau τ\tau
Hydrostatic Biaxial σx=σy=σ\sigma_x = \sigma_y = \sigma (σ,0)(\sigma, 0) 00 (Point) σ\sigma σ\sigma 00
Pure Biaxial Equal & Opposite σx=σ,σy=−σ\sigma_x = \sigma, \sigma_y = -\sigma (0,0)(0, 0) σ\sigma +σ+\sigma −σ-\sigma σ\sigma

9. Key Engineering Facts & Exam Takeaways

  1. Center Always on σ\sigma-Axis: The center of Mohr's circle always lies on the normal stress axis (yc=0y_c = 0) because shear stress is zero when averaged across orthogonal planes (τxy+(−τxy)=0\tau_{xy} + (-\tau_{xy}) = 0).
  2. Radius Equals Maximum In-Plane Shear: The radius RR is identically equal to the maximum in-plane shear stress τmax⁡,in-plane\tau_{\max, \text{in-plane}}.
  3. Point Circle (Zero Radius): A state of equal biaxial stress (σx=σy,τxy=0\sigma_x = \sigma_y, \tau_{xy} = 0) produces a Mohr's circle with radius zero (a point on the σ\sigma-axis). Under this state, shear stress is zero on every plane in that 2D space.
  4. First Stress Invariant: The distance from the origin to the center of the circle is OC=σx+σy2=σ1+σ22=I12OC = \frac{\sigma_x + \sigma_y}{2} = \frac{\sigma_1 + \sigma_2}{2} = \frac{I_1}{2}. Thus, shifting coordinate axes rotates diameter XYXY but leaves the center CC fixed.
  5. Angle Doubling (2θ2\theta): A physical rotation of θ\theta in the real element corresponds to a rotation of 2θ2\theta on Mohr's circle in the same direction.
  6. Complementary Shear on Circle: Points X(σx,τxy)X(\sigma_x, \tau_{xy}) and Y(σy,−τxy)Y(\sigma_y, -\tau_{xy}) always have equal and opposite shear ordinates, ensuring that XYXY is always a straight diameter passing through CC.

10. Common Pitfalls, Traps & Anti-Patterns

  • Trap 1 (The Radius vs Diameter Trap): Confusing the diameter with the radius. The difference σ1−σ2\sigma_1 - \sigma_2 is the diameter of Mohr's circle, while τmax⁡=σ1−σ22\tau_{\max} = \frac{\sigma_1 - \sigma_2}{2} is the radius.
  • Trap 2 (Sign of the Center Abscissa): When one normal stress is compressive, students often write σavg=σx−σy2\sigma_{\text{avg}} = \frac{\sigma_x - \sigma_y}{2}. The formula is always the algebraic average: σx+σy2\frac{\sigma_x + \sigma_y}{2}. If σx=100\sigma_x = 100 and σy=−40\sigma_y = -40, σavg=100+(−40)2=+30 MPa\sigma_{\text{avg}} = \frac{100 + (-40)}{2} = +30\text{ MPa}, not 70 MPa70\text{ MPa}.
  • Trap 3 (The Same-Sign 3D Shear Blunder): Assuming the maximum shear stress is always the radius of the plane stress circle. When σ1\sigma_1 and σ2\sigma_2 have the same sign, the true maximum shear stress is ∣σmax⁡∣2\frac{|\sigma_{\max}|}{2}, which is represented by the out-of-plane circle spanning between σ1\sigma_1 and σ3=0\sigma_3 = 0.
  • Trap 4 (Clockwise vs Counterclockwise Direction on Circle): Rotating the angle in the opposite direction. If the physical plane is rotated by θ\theta counterclockwise, you must rotate on Mohr's circle by 2θ2\theta counterclockwise.
  • Trap 5 (Shear Sign Convention Inversion): Plotting shear without checking rotational tendency. Always plot clockwise-tending shear as positive (upward) and counterclockwise as negative (downward) to preserve the rotation-direction equivalence.

11. Standards & Code Provisions

IS 456:2000 (Plain and Reinforced Concrete)

  • Clause 31.6.2 & Clause 40 (Diagonal Tension & Shear):
    In prestressed and reinforced concrete elements, Mohr's circle is used to calculate the principal tensile stress caused by the combination of prestress compression (σcp\sigma_{cp}) and shear stress (τv\tau_v): σt=(σcp2)2+τv2−σcp2\sigma_{t} = \sqrt{\left(\frac{\sigma_{cp}}{2}\right)^2 + \tau_v^2} - \frac{\sigma_{cp}}{2} The cracking load is reached when σt\sigma_t exceeds the tensile strength of concrete fct=0.7fckf_{ct} = 0.7\sqrt{f_{ck}}.

IS 800:2007 (General Construction in Steel)

  • Section 9 & Clause 10.5 (Combined Stresses):
    Mohr's circle radius forms the basis of the Tresca maximum shear stress criterion (τmax⁡≤fy/2\tau_{\max} \le f_y / 2), which serves as a lower-bound safe design against plastic yield.

ASTM D2850 / IS 2720 (Part 10 & 12) (Soil Testing)

  • Triaxial shear testing requires plotting multiple Mohr's circles at failure for varying confining pressures (σ3\sigma_3) to establish the strength envelope of soils.

12. Comprehensive Formula Box & Practice Problems

Master Formula Summary

Geometric FeatureMathematical FormulationCenter of Mohr’s Circle (C)(σavg,0)=(σx+σy2,0)Radius of Mohr’s Circle (R)R=(σx−σy2)2+τxy2=σ1−σ22Equation of the Circle(σ−σavg)2+τ2=R2Major Principal Stress (σ1)σ1=σavg+R=σx+σy2+RMinor Principal Stress (σ2)σ2=σavg−R=σx+σy2−RMaximum In-Plane Shear Stressτmax⁡,in-plane=R=σ1−σ22Normal Stress on Max Shear Planesσs=σavg=σx+σy2First Stress InvariantI1=σx+σy=σ1+σ2=2×xcAbsolute 3D Maximum Shear Stressτabs, max=max⁡(∣σ1−σ2∣2,∣σ1−σ3∣2,∣σ2−σ3∣2)\begin{array}{|l|l|} \hline \textbf{Geometric Feature} & \textbf{Mathematical Formulation} \\ \hline \text{Center of Mohr's Circle } (C) & \left(\sigma_{\text{avg}}, 0\right) = \left(\frac{\sigma_x + \sigma_y}{2}, 0\right) \\ \hline \text{Radius of Mohr's Circle } (R) & R = \sqrt{\left(\frac{\sigma_x - \sigma_y}{2}\right)^2 + \tau_{xy}^2} = \frac{\sigma_1 - \sigma_2}{2} \\ \hline \text{Equation of the Circle} & (\sigma - \sigma_{\text{avg}})^2 + \tau^2 = R^2 \\ \hline \text{Major Principal Stress } (\sigma_1) & \sigma_1 = \sigma_{\text{avg}} + R = \frac{\sigma_x + \sigma_y}{2} + R \\ \hline \text{Minor Principal Stress } (\sigma_2) & \sigma_2 = \sigma_{\text{avg}} - R = \frac{\sigma_x + \sigma_y}{2} - R \\ \hline \text{Maximum In-Plane Shear Stress} & \tau_{\max, \text{in-plane}} = R = \frac{\sigma_1 - \sigma_2}{2} \\ \hline \text{Normal Stress on Max Shear Planes} & \sigma_s = \sigma_{\text{avg}} = \frac{\sigma_x + \sigma_y}{2} \\ \hline \text{First Stress Invariant} & I_1 = \sigma_x + \sigma_y = \sigma_1 + \sigma_2 = 2 \times x_c \\ \hline \text{Absolute 3D Maximum Shear Stress} & \tau_{\text{abs, max}} = \max\left(\frac{|\sigma_1 - \sigma_2|}{2}, \frac{|\sigma_1 - \sigma_3|}{2}, \frac{|\sigma_2 - \sigma_3|}{2}\right) \\ \hline \end{array}

Practice Problems

  1. Problem 1 (GATE CE Objective):
    At a point in a strained material, the state of stress is σx=80 MPa\sigma_x = 80\text{ MPa}, σy=20 MPa\sigma_y = 20\text{ MPa}, and τxy=40 MPa\tau_{xy} = 40\text{ MPa}. The radius of Mohr's circle is:
    Answer: 50 MPa50\text{ MPa}
    Explanation: R=(σx−σy2)2+τxy2=(80−202)2+402=302+402=50 MPaR = \sqrt{\left(\frac{\sigma_x - \sigma_y}{2}\right)^2 + \tau_{xy}^2} = \sqrt{\left(\frac{80 - 20}{2}\right)^2 + 40^2} = \sqrt{30^2 + 40^2} = 50\text{ MPa}.

  2. Problem 2 (SSC JE Objective):
    If Mohr's circle of stress for a given state of stress degenerates into a single point on the horizontal axis, the state of stress is:
    Answer: Hydrostatic / Pure Biaxial equal stress (σx=σy\sigma_x = \sigma_y and τxy=0\tau_{xy} = 0).
    Explanation: For radius R=0R = 0, both σx−σy2=0  ⟹  σx=σy\frac{\sigma_x - \sigma_y}{2} = 0 \implies \sigma_x = \sigma_y and τxy=0\tau_{xy} = 0.

  3. Problem 3 (UPSC ESE Style):
    In a state of pure shear where τxy=τ\tau_{xy} = \tau and normal stresses are zero, the center and radius of Mohr's circle are:
    Answer: Center (0,0)(0,0) and Radius τ\tau.
    Explanation: σavg=0+02=0\sigma_{\text{avg}} = \frac{0 + 0}{2} = 0, and R=02+τ2=τR = \sqrt{0^2 + \tau^2} = \tau. The circle is centered at the origin.

  4. Problem 4 (GATE CE Conceptual):
    A state of plane stress has principal stresses σ1=+60 MPa\sigma_1 = +60\text{ MPa} and σ2=+20 MPa\sigma_2 = +20\text{ MPa}. The absolute maximum shear stress is:
    Answer: 30 MPa30\text{ MPa}
    Explanation: Because both principal stresses are positive, σ3=0\sigma_3 = 0. The three principal stresses are 60,20,0 MPa60, 20, 0\text{ MPa}. The absolute maximum shear stress is σ1−σ32=60−02=30 MPa\frac{\sigma_1 - \sigma_3}{2} = \frac{60 - 0}{2} = 30\text{ MPa}. (Notice that in-plane shear is only 60−202=20 MPa\frac{60 - 20}{2} = 20\text{ MPa}).

  5. Problem 5 (State AE Objective):
    The coordinates of the Pole PP on Mohr's circle have the property that:
    Answer: A straight line drawn from the Pole parallel to any physical plane intersects the circle at the stress coordinates (σ,τ)(\sigma, \tau) acting on that plane.
    Explanation: This is the defining kinematic property of the Pole (Origin of Planes).